Multi-objective optimization of electrochemical finishing for attaining the required surface finish and geometric accuracy in the hole making process

Marginal adaptation of zirconia CAD-CAM copings with two cervical finish lines

Experimental investigation of the effect of electrochemical finishing process parameters on surface roughness, geometric accuracy and material removal rate using Box-Behnken design in response surface methodology

Experimental Study on In-Depth Residual Stress due to 420 Stainless Steel Creep-Feed Grinding Using the Deflection-Electro Polishing Technique

Numerical Study on the Effect of Biaxial Surface Stresses on the Measurement Accuracy of Mechanical Properties in A516 Using Indentation

Accurate estimating of mechanical properties of austenitic stainless steels with residual stresses using indentation technique

Improvement of indentation technique for measuring general biaxial residual stresses in austenitic steels

Developing a method in measuring residual stress on steel alloys by instrumented indentation technique

Numerical study of the effect of yield strain and stress ratio on the measurement accuracy of biaxial residual stress in steels using indentation

Experimental Study of Residual Stresses Due to Inconel X-750 Creep-feed Grinding by the Electropolishing Layer Removal Technique

Stress Measurement on Carbon Steel Specimen by Consideration of Magnetic-Barkhausen-Noise

Numerical Study of Plasticity Effects on High Residual Stress Measurement Using Ring-Core Technique

Numerical Study of the Effect of Materials’ Plastic Behavior on Equibiaxial Residual Stress Measurement Using Indentation

high power magnetic gear boxes

Measurement of Strain by Digital Shearography with a New Algorithm of Phase Calculation

Optimization of TIG Repair Welding in Dissimilar Ma terial Sheet, Carbon SteelA516 Grade 60 and Stainless Steel 316L by Taguchi and St atistical Method

Numerical stress analysis in resistance spot-welded nugget due to post-weld shear loading

Investigation on Effect of Tube Hydroforming Parameters on Thickness and Residual Stresses in a T Shaped Tubes by Finite Element Method

Stresses Evaluation by Magnetic Barkhausen NoiseTechnique

Strain Analysis by Digital Shearography on an Aluminium Plate with a Geometric Defect under Thermal Loading

Study on Residual Stresses Redistribution in Welded Joint in Shot pe ening process

Numerical Analysis of explosion effects on the redistribution of residual stresses in the underwater welded pipe

Experimental stresses analysis by DIC

Fundamental of Structural Health Monitoring

Multi-responses optimization of ultrasonic machining process

Process Parameters Selection for Obtaining Certain Residual Stress Distribution on Cylindrical Aluminum Specimen

Study on Effects of Mechanical Properties of Aluminum Alloys on Residual Stresses Distribution in Cold Rolling Process on the Cylindrical Specimen Using FEM Simulation

Evaluation of through thickness residual stress in WC-Co coatings using electro discharge hole drilling method

Stresses analysis around of ring ore due to non uniform residual stresses measurement

Improvement in accuracy of the measurements of residual stresses due to circumferential welds in thin-walled pipe using Rayleigh wave method

Non Uniform Residual Stresses Analysis in Engineering Structure

Experimental and numerical study of measuring high welding residual stresses by using the blind-hole-drilling technique

Study on modelling methods of friction stir welding

Numerical analysis for residual stresses measurement by indentation test